Pro-Ject RPM 3 Carbon Turntable Spares

Pro-Ject RPM 3

The latest edition to the RPM range of turntables follows on from where the hugely popular Genie 3 left off. The RPM 3 Carbon boasts a number of improvements from its sibling, the RPM 1 Carbon. The new RPM 3 Carbon design has been upgraded to significantly reduce resonance across the turntable. While maintaining the instantly recognisable shape, this turntable boasts improvements in the tonearm, bearing, and motor.

If you own this turntable and need to source some spare parts, you can find information on all the available parts on this page. Everything that is available to purchase online can be purchased by clicking the corresponding number in the table below...

If you need something that is on this page, but that cannot currently be purchased through our site, please contact us on 01235 511 166 for more information.

Spare Parts:

01. Main Platter Black (1947 676 023)
  Main Platter Red (1947 676 024) 
  Main Platter White (1947 676 025)
02. Drive Belt (1940 675 200)
03. Motor Complete DC (1942 576 022)
04.  Platter Spindle (1940 675 202) 
05. Turntable Feet (1940 875 145)
06. RCA Board (1940 675 055)
07. S Carbon Tonearm (1944 191 510)
08. Tonearm Inner Cables (1940 675 005)

This turntable was supplied with the Ortofon 2M Silver.
Replacement styli are available here.


This turntable has a fixed, non-replaceable, counterweight.

Power Supply:
This turntable uses the 15V / 1A power supply, available here.