- Latest News
- Product Catalogue
- Where to Buy
- Tech Support
- Contact Us
- Register Warranty
Due to circumstances relating to this product, it is only available in the UK to special order, which means it is not stocked as standard in our warehouse. A special order item will be placed on order with the relevant manufacturer during our next scheduled Purchase Order. As we forecast orders up to two months ahead of time with some suppliers, this does not mean the item will automatically be included on the next shipment we receive. It also does not mean that the item will immediately be placed on order with the supplier, as we group special orders together for logistical purposes. Therefore, we estimate lead times on most special order items of 8 – 12 weeks.
Click here to read our full Terms and Conditions.
The new Ortofon TA-210 tonearm has gone to the next level of reducing unwanted vibrations in the tonearm by adding more damping material in more places when compared to it's younger sibling, the TA-110. Ortofon's extensive knowledge of vibration properties and characteristics in different shapes and materials has been applied for optimization of the TA-210 tonearm.
The TA-210 is given a precision machined slit in each end of the aluminum tube. A piece of Ortofon special vibration damping compound is integrated into each slit. The bottom slit has rubber inserts with high vibration damping properties, and the other top-facing slit has a special proprietary TPE compound with excellent damping properties. Due to the use of these two different materials, an extended damping effect is obtained in the largest possible range. Both inserts integrated in the tonearm tube are manufactured at the Ortofon technical facilities in Nakskov, Denmark.
|Effective Mass (w/out Headshell):||5g|
|Effective Armlength (Stylus - Pivot Point):||329.0mm|
|Mounting Distance (Pivot Point - Turntable Centre):||316.6mm|
|Tracking Force Adjusting Range:||0 - 3 / 0 - 4g|
|Height Adjustment Range:||35 - 55mm|
|Armbase Mounting Hole Diameter:||19 - 20mm|
|Diameter of the Tonearm Centre Shaft:||18.0mm|
|Inner Null Point:||66mm|
|Outer Null Point:||120.9mm|
|Counterweight for Cart & Headshell Mass Between 21 and 28g:||Included|
|TA-110 Total Weight (Incl. Headshell)||536g|
|Set of Tonearm Cables 6NX-TSW-1010:||Included|
|Extra Mass Ring for Heavier Cartridges:||Included|
|Extra Mass Ring Weight:||45g|
The counterweight should be attached onto the rear of the tonearm with the inner number scale facing forward. If the extra mass ring is needed, it must be installed prior to attaching the counterweight to the tonearm. The extra mass ring should be installed on the back of the counterweight and may need to be twisted slightly to facilitate the installation. Ensure that the extra mass ring fits tightly to the thick part of the counterweight.
For more help and advice visit our Tech Support section
Many of our products are firm favourites with the global hi-fi press, and this one is no exception. Check out the coveted awards and/or reviews this great product has received. To find out more click the icons below.